ajmarshall
New member
So I built my S.E.X a few years back and had it up and running. Then one of the channels crapped out on me. The right channel seems to be working fine but the left channel output is almost nothing. What does come out of the left channel has no lower frequency sounds. The channel also makes popping sounds on startup and shutdown ( mostly on shutdown). resistance checks come out ok except for terminal 40 which seems to be an open circuit and there is some weird readings on the volume pot. Voltage checks come out ok but again terminal 40 does not read 0 volts. I get inconsistant reading when I check it ( some even negative voltages) but it changes as I take the measurement.
Any help on getting this amp back up and running would be much appreciated.
Andy
Any help on getting this amp back up and running would be much appreciated.
Andy