Help! So close! Left channel failed after five minutes; [RESOLVED]

[Necplur]

OK, I ordered the replacement LED's.  In the meantime, I connected A3 to A8, as a temporary connection.

Everything looks good... except:  The four places I should be getting 0V, I'm getting 0.002V, on terminals 3,6,8,10 (when setting my meter to VDC "2";  It reads 0.02V when setting the meter to "20" and 0.2V when setting to "200")

Resistance checks are normal.

 

[Paul Birkeland]

If I told you that you had two tenths of a cent in your bank account, you'd tell me that you're broke.  That's plenty close to 0V.

 

[Necplur]

Whew!  Thanks so much! (I didn’t know if it weren’t exactly zeroing it meant something. Like leaking. )

Spent about an hour with 650’s and Verite Closed. Love this thing!

This help was amazing. Thanks again.