Help installing a DACT CT2 in a SEX 2.0

[wylymon]

The DACT did not come with instructions and I have not
found any help on line. The DACT came with an optional 
wiring option that allowed solderless connection
by a Molex type connector to the six pins on the DACT.
I can't figure out how to wire the DACT.  Any help would
be really appreciated.

James Wyly

 

[Paul Birkeland]

Set your meter to DC resistance, then turn the volume control all the way down.

There should be two pairs of pins that show almost 0 DC resistance between them.  One pin from each set is ground, the other is signal + out.

Turn the volume control all the way up.  There should now be two different pins that show almost 0 DC resistance between them.  One pin from each set is signal + out, the other pin is signal + in.

Since signal out is present in both sets of measurements, process of elimination will give you ground and signal + in.

-PB