Good source for compatible aluminum volume/selector knobs?

S

spaniard02

New member
I'm wondering if anybody could recommend a good online vendor to shop for some reasonably-priced aluminum knobs to swap in place of the stock BH volume & selector knobs (and obviously compatible / with the same internal width).  My ideal find would be something semi-gloss black with graded 'notched'(?) sides and a decent position indicator that's about two-thirds or three-quarters of the total (base) diameter of the stock BH knobs - this last (size) factor being the most critical requirement.

Any suggestions would be much appreciated, thanks!
 
Here is one source: http://www.goldpt.com/knobs.html. These knobs are for 6mm shafts but work with 1/4" shafts due to the two set screws. I use them on my Foreplay with no probs. An internet search should turn up others. good luck
 
OOPS!! My bad! I'm wrong, the 6mm Goldpoint knobs do not fit the 1/4"(6.35mm) shafts.  I do use them on my foreplay but I can't remember what I did five years ago to make them fit. Sorry for the brain f....  The Goldpoints are nice though.
 
If 6mm is too small, just drill them out to 1/4inch. I drill out knobs all the time. Make sure the set screw is backed out enough so that the drill bit dosen't hit it.

Bernie.
 
These are 30mm dia x 20 mm high.  Satin black with a little dimple perfect for a drop of white paint.  Solid machined aluminum.

10657240303_de898d9b9e_o.jpg


You can get 2 shipped direct from China off ebay for less than 5 bucks.  Stupid cheap.
 
Hey Mike,

How do you like the Overnight Sensations?

To the O/P, try www.vt4c.com. 

He has 9 million knobs.  He is also a nice seller to work with.
 
I don't know what you are talking about.

The only "overnight sensation" I know of is one of my fav Frank Zappa albums.

 
You must log in or register to reply here.
Back
Top