Crack Manual Question

[scotth]

I am currently building the Crack and was a little confused about something. Under "Heater Wiring" it says to attach but not solder B8L and B7L but never goes back and tells you to solder them that I can see. The next step is soldering B8U and B7U, am I supposed to solder B8L and B7L at the same time? Am I missing something? Thanks.

 

[scotth]

I got to the end and didn't see any other directions for those terminals, so I just soldered them then. Everything measured right and worked the first time without any issues. Must be beginner's luck.

 

[Paul Birkeland]

Yes, you can just solder B7 and B8 when the second set of wires is attached.

-PB