charlie.waid
New member
Had the crack knocked off a table during a party. 2 pins broke off 9pin and were lodged in the sockets, pulled them out and socket seems undamaged. Right channel audio coming through whisper quiet. Voltages as follows:
1) .3
2) 190
3) 0
4) 190
5) 84.3
6) 0
7) 75.4
8) 0
9) 114.8
10) 0
Only LED that does not light (including speedball LEDs) is bridge between center of 9 pin and A8. I have reflowed those joints as well as joints on terminal 1 and B1
Both tubes were swapped out to ensure they would not be the issue
Is it possible something was damaged in the fall? Or is there somewhere else I should be looking?
1) .3
2) 190
3) 0
4) 190
5) 84.3
6) 0
7) 75.4
8) 0
9) 114.8
10) 0
Only LED that does not light (including speedball LEDs) is bridge between center of 9 pin and A8. I have reflowed those joints as well as joints on terminal 1 and B1
Both tubes were swapped out to ensure they would not be the issue
Is it possible something was damaged in the fall? Or is there somewhere else I should be looking?
Last edited:
