Crack chassis connection points?

[Dneu2011]

I’m about to start my Crack build but need some help identifying all the chassis connection points. I had my plate powder coated and it looks good, but told the guy to only paint one side and he painted both sides on accident.

Here is what I have so far:
- safety ground lug next to the IEC
- Terminal 3 next to the 9 pin socket
- Volume pot outer body

Are there any other points where I need to scratch off the paint?

Thank you.

 

[Paul Birkeland]

Those are the three you need to do. It may also help to pass a 1/4" drill bit through the power transformer mounting holes to resize the internal diameter to where it needs to be.

-PB