Bottlehead Crack + Beyerdynamic T1 2nd (600ohm) insufficient volume

[Varail]

I used both the Ifi Nano and Qutest (set on 2v) so it is not the source.

This is a pic with the plate info of the converter.

 

[Paul Birkeland]

I used both the Ifi Nano and Qutest (set on 2v) so it is not the source.

Were both plugged into the same source?  I would continue to suggest the importance of measuring the output just so that can be checked off the list.

 

[Varail]

They are getting 2.07 V ( It was measured 2 hours ago ).

The BC is going to be converted to 220V . We will take it from there ..

 

[Paul Birkeland]

What tube is plugged into the 9 pin socket?  Did the seller include the stock 6080?

 

[Varail]

Western Electric 5998/421A
Yes he did.

 

[Paul Birkeland]

A 421A will not plug into the 9 pin socket.

 

[Varail]

I dont have the unit anymore. I gave it along with the tube but it was a big tube.
The 3rd one from the pic

 

[Paul Birkeland]

The 9 pin socket is the front socket, where the small tube goes.  There are certainly some pin compatible tubes that you could plug in there that wouldn't work properly, so it is worth double checking what's being run in there.