BeePre mono input...

[bernieclub]

I'd like to get a mono input to both channels to do some output capacitor comparisons and I'm having trouble getting my source to output mono.  Can I simply jumper the center pins of the input jacks?  I have some V-Cap ODAMs in anticipation of upgrades and I'd like to give them a semi valid taste test.  Thanks!
Bernie

 

[Paul Birkeland]

If this is BeePre 2, I would jumper the outputs of the balance pots.  If it's the BeePre 1, I would jumper the outputs of the volume pot.  Doing this will provide some impedance between the outputs of your sources that may be desirable.

 

[bernieclub]

Thanks P.B., it's BP2...I'll jumper the balance pot.