Anodized screws. Mainline.

[Strikkflypilot]

Hi.
From reading through the Mainline, I cannot see a reason the anodized screws(on the topside visible ones, not washers, nuts or that sort)  I am planning to use should cause grounding issues.

Anyone thinking the contrary?

 

[Paul Birkeland]

You can double check with your meter to see if there is any issue with them.  (Measure resistance between the #8 grounding screw and the center lugs of each 5-lug strip and the shield grounding solder tabs)

For mounting the terminal strips, I would put an extra lockwasher between each terminal strip and the chassis to aide in conduction. 

 

[Strikkflypilot]

Thanks.
Looking very much forward to this build.