Amp compatability

[Dnorris]

I'm currently building an Eros, but plan on a BeePre next. The amp I have to drive is an SET (845/211 tube) with a 150 Kohm input impedance, 50 watt (Single ended, not balanced), 1.0 Volt for full output. I see that given the BeePre specs it puts out plenty of voltage, would that amp seem to be a reasonable fit with the BeePre or am I missing something obvious. Thanks.

 

[Paul Birkeland]

That amp will be a good match for the BeePre.

 

[Dnorris]

Thank you, Paul. I thought so, but I wasn't sure about matching impedance, etc. Looking forward to adding some 300b flavor to my vinyl spinning. BeePre/BeeQuiet order on the way.