#6 round lockwasher (small)

[Irongoat]

Hi everyone,

Building my first crack and being the total noob I am I'm not sure if I have kissed something. I have read the instructions multiple times and it seems I have done it correct but after the building  phase I still have one #6 round lockwasher left.  I think the instruction only uses one or have I missed something.

I also have the phillips self tapping screw left.

Can you please confirm that I should have those left or have I missed something.

Thanks for your help.

 

[Laudanum]

The self tapping screw is just for tapping the terminal strip mounting holes for the 2 strips that flank the transformer.  So yes, it should be left over.  I'm pretty sure that you only use one #6 lockwasher on the 9 pin socket mounting hole that doesnt also hold the terminal.

You're good, nothing missed.

 

[Irongoat]

Thanks for your reply. I'm going to start soldering now then. Can't wait to hear the finished product!  Looking forward to hearing it tonight.

 

[Paul Birkeland]

Ending up with one extra lockwasher may just mean that one extra one was packed (they tend to stick together a bit).

-PB