240V Foreplay I Transformer (Black Arts Audio)

[andrewcooke]

Hi,

Email to Black Arts Audio http://www.jeack.com.au/~lucas/ is bouncing, and the site doesn't seem to have been updated in a few years (I hope he is OK).

So does anyone know where I could get a 240V Foreplay I transformer?  Bottlehead don't sell these, but used to recommend Black Arts.

Thanks.
Andrew

PS I would also be interested in buying someone's old transformer if they have a 240V foreplay I they no longer use!

 

[Paul Birkeland]

I think you could use two of the original power transformers with the primaries in series, provided you went totally dual-mono with the power supply and kept the current balance pretty tight between the two.

PJ would have some good thoughts on any risks associated with doing something like this.

-PB

 

[Paul Joppa]

We used to suggest the Hammond 369AX, which requires a change to a FWCT power supply (from FWB originally) but does have a 230v/50Hz primary.

I wouldn't go the series route because of the risk that any failure of one channel would spike the voltage on the other, killing too many other components. It would be a bear to debug any time anything went wrong.

If you can find a small 230:120v stepdown, it might fit on the chassis along with the original, and would give doubled power line isolation - that could be a good thing.

 

[andrewcooke]

Thanks; I could probably find a stepdown.

The foreplay is already built, so I'd rather change it as little as possible.  Are the original 120V transformers still available?

(I originally bought a kit without transformer, and a transformer from Black Arts, which arrived damaged; ten(?) years later I am seeing what I can salvage).

Andrew

 

[Paul Birkeland]

The original transformer can be purchased here.

 

[Grainger49]

Note, the above linked transformer is a 6.3V heater, so it requires a little rewiring of the heater wires on a FP 1 which was 12.6V.

No doubt PB overlooked the title that says FP 1.  He knows better. 

I'm not sure if there are any more differences between the FP 1 and FP 2 other than the heater voltage.

 

[Paul Birkeland]

Ah, yes, good call on the 12V to 6V conversion.  It has been a long time since I've even looked at a Foreplay I.

 

[Paul Joppa]

The original was (IIRC) something that Antique Electronic Supply carried. Here's the current offering, similar enough to work:

http://www.tubesandmore.com/search/node/p-t442

 

[andrewcooke]

Thanks guys!