1 LED lights up immediately after turning it on, smoke from one of the 270ohm 5w

[Jimb0]

btw, one of the rings on the board for the 2n2222 came off on the bottom side but i was able to solder the top side

Also, none of the LED's light up on that board. I remember all of them use to light up when I tested it the first time around before the 270 ohm starting smoking

 

[Deke609]

Jimb0 - Don't know if this will help, but it's worth a shot. From your first pic of the board underside it looks like there are lots of little solder shards around the soldered legs of the transistors - they might be forming a solder bridge and shorting the legs together. Maybe try gently scraping them off.


cheers, Derek

 

[kgoss]

Check the LED orientation.

Maybe I'm wrong, but from the pictures it appears the LEDs on the B side are in backward according to the silkscreen on the board.

 

[Paul Birkeland]

I would recommend contacting replacement parts and asking for a new board, transistors, resistors, and heatsinks/mounting kits.  Once the traces start to lift off, getting the board to work can be more challenging. 

 

[Jimb0]

Will do, thanks PB